Difference between revisions of "Henry Hein"
(Created page with "==About== I'm a rising junior [https://ece.umn.edu/ Computer Engineering] student at the College of Science and Engineering at the [https://twin-cities.umn.edu/ University of...") |
|||
Line 12: | Line 12: | ||
* [https://drive.google.com/file/d/1bciR-NHcYfJR2w1vt1gdmCYjBUsRQd68/view?usp=sharing General Overview] | * [https://drive.google.com/file/d/1bciR-NHcYfJR2w1vt1gdmCYjBUsRQd68/view?usp=sharing General Overview] | ||
* [https://drive.google.com/file/d/1lzIjJnOkduv2qboaM37AcWzJw4D3VZAR/view?usp=sharing Hello World Demo] | * [https://drive.google.com/file/d/1lzIjJnOkduv2qboaM37AcWzJw4D3VZAR/view?usp=sharing Hello World Demo] | ||
====Github Repository==== | |||
[https://github.com/Tohbs/Morse-Code-Translator Github] | |||
==Temperature Sensor FPGA== | |||
This project consisted of using an FPGA to measure the temperature using a TMP36 sensor, and to use ADC to allow the FPGA to display the current temperature on a 7 segment display | |||
==Contact Information== | ==Contact Information== | ||
Email: | Email: | ||
* henry.hein236@gmail.com (Personal) | * henry.hein236@gmail.com (Personal) | ||
* hein0470@umn.edu (School) | * hein0470@umn.edu (School) |
Revision as of 11:42, 20 May 2021
About
I'm a rising junior Computer Engineering student at the College of Science and Engineering at the University of Minnesota - Twin Cities. Some areas that I'm interested in is embedded systems and computer architecture.
Research Topics
My main research project under Marc Riedel is working with Microfluidics and implementing AI learning into pathfinding for the droplets.
The second Research project that I am working on deals with AI being applied to figure out the peptide bonding strength of different
Projects (School and Personal)
Here is a collection of some of my projects that I have done as school projects or personal projects, as well as a video demo.
Morse Code Translator
This project was the final project for Introduction to Microcontrollers. In this project, a PIC 24 microcontroller was utilized to accept input using a button to act as a Morse code signal. It would then output this to a LCD display attached and included start transmission and end transmission codes so input could be halted or started at the user's will
Video Demos
Github Repository
Temperature Sensor FPGA
This project consisted of using an FPGA to measure the temperature using a TMP36 sensor, and to use ADC to allow the FPGA to display the current temperature on a 7 segment display
Contact Information
Email:
- henry.hein236@gmail.com (Personal)
- hein0470@umn.edu (School)